Acclaim Design & Profiles Inc.
 
 
 
   
  CORNERFORMS  
 

Fastening Profiles for Slatwall, Gridwall, Slatgrid & Most 3/4" Thick Substrates.

Corner Forms is easy to install, easy to assemble / disassemble and reconfigure.

The patented two part fastening system that can be used to construct perimeter walls, privacy rooms, fitting room, floor fixtures, temporary fixtures, modular counters, trade show booth and hundreds of other construction applications.

Corner Forms - standard - 96" length; angles are based on inside degrees of measure. See diagrams.

Profile Unit consists of main form (one, two, three & four panel connection) and an appropriate number of standard ¾" edge caps made of plastic or aluminum.

For other substrates, such as plastic and wire, edge cap can be substituted for kerf caps (plastic substrates), grid adapters (wire grid panels) fin kerf caps (hub System applications) and more. For additional panel rigidity, especially for slatwall panels' use, aluminum edge caps are recommended. Reference edge cap information for the appropriate ‘edge channel" for your application.

CornerForms 30 Degrees
Description
A two panel fastening profile. Connects panels at a 30 degree "inside" angle. Applications: construct "V" shape product category dividers using 30 degree (3177) along with companion profile "angled finish end profile" (3181). See illustration for example.

Show Details

CornerForms 30 Degrees

CornerForms 45 Degrees
Description
Connects two panels at a 45 degree "inside" angle. Applications: In addition to "Pop outs", 45 degree (3433) and companion profile 90 degree (2516) is used to construct a three-sided 90/45 degree triangle. See illustration for example.

Show Details

CornerForms 45 Degrees

CornerForms 60 Degrees
Description
Connects two panels at a 60 degree "inside" angle. Applications: In addition to "Pop outs", 60 degree can use to construct an equilateral triangle. Use companion 120 degree (3187) to construct "pop out perimeter wall." See illustration for example.

Show Details

CornerForms 60 Degrees

CornerForms 90 Degrees (Radius Sharp)
Description
onnects two panels at a 90 degree right angle. The connector and its associated edge cap component naturally reinfoce the panel. On site assembly is extremely simple. Applications: Multitude panel applications, i.e. fitting rooms, column surrounds, partitions, & more. Profile can be used in conjunction with 135 (2600) to create continuous perimeter wall with "pop outs." Other companion profiles are "T" connector (2700), "4-way" connector (2844), 180 degree (2598), and finish end cap (2810). See illustration for example.

Show Details

CornerForms 90 Degress (Radius Sharp)

CornerForms 90 Degrees Sharp
Description
Connects two panels at a 90 degree with a "square outside edge." Designed to be "dimensionally" compatible to the "T" connector (2700). Applications: Fitting/privacy rooms, column surrounds, partitions, & more. See illustration for example.

Show Details

CornerForms 90 Degrees Sharp

CornerForms 120 Degrees
Description
Connects two panels at a 120 degree angle. The 120-degree profile (3187), in conjunction with 60-degree profile (2859), can create a continuous perimeter wall with "pop outs." Applications: Pop out perimeter wall, hexagon shaped rooms/displays, fitting/privacy rooms, column surrounds, partitions & more. See illustration for example.

Show Details

CornerForms 120 Degrees

CornerForms 135 Degrees
Description
Connects two panels at a 135 degree angle. The 135-degree profile (2600), in conjunction with 90-degree profile (2516), can create a continuous perimeter wall with "pop outs." Applications: Pop out perimeter wall, octagon shaped rooms/displays, fitting/privacy rooms, column surrounds, partitions & more. See illustration for example.

Show Details

CornerForms 135 Degrees

CornerForms 180 Degrees
Description
Connects two panels at a 180 degree, "edge to edge" Applications: Perimeter wall, fitting/privacy rooms, partitions, & more. See illustration for example.

Show Details

CornerForms 180 Degrees

CornerForms T-Connector
Description
Connects three panels consisting of two panels connected edge to edge & one perpendicular. Applications: Fitting/privacy rooms, column surrounds, partitions, & more. See illustration for example.

Show Details

CornerForms T-Connector

CornerForms Y-Connector
Description
Connects three panels together at an equal at 120 degree apart. Applications: Three panel floor display, privacy rooms, floor fixtures, counters, tradeshow booths and many other construction applications. See illustration for example.

Show Details

CornerForms Y-Connector

CornerForms Y-90 Connector
Description
Connects three panels together; two panels are connect at 90 degree angle and one panel at 135 degree. Applications: Three panel floor display, privacy rooms, floor fixtures, counters, tradeshow booths and many other construction applications. See illustration for specific details.

Show Details

Y-90 Connector

CornerForms 4-Way
Description
Connects four panels together; consisting of two panels connected edge to edge & two panels are perpendicular. Applications: Four panel floor display, privacy rooms, floor fixtures, counters, tradeshow booths and many other construction applications. See illustration for example.

Show Details

CornerForms 4-Way

CornerForms T-Connector "S"
Description
Connects three panels consisting of two panels connected edge to edge & one perpendicular. Features a 1" x 1" opening for slotted tube, wire chase, and other uses. Applications: Fitting/privacy rooms, column surrounds, partitions, & more.

Show Details

CornerForms T-Connector "S"

CornerForms 180 Connector "S"
Description
Connects two panels at a 180 degree, "edge to edge." Features a 1" x 1" opening for slotted tube, wire chase and other uses. Applications: Perimeter wall, fitting/privacy rooms, partitions & more.

Show Details

CornerForms 180 Connector "S"

CornerForms Finished End Cap
Description
Single panel (edge) profile; provides a decorative "edge treatment" for vertical and horizontal edges. Can be mechanically attached to wall &/or fixture surface to receive panel. Applications: end of a perimeter wall application, mounting a panel perpendicular on to wall or fixture. See illustration for example.

Show Details

CornerForms Finished End Cap

CornerForms Finished End Cap - Angled
Description
Single panel (edge) profile is design to be mounted to substrate along with 30 degree profile to create pop out. Applications: product category dividers; angled edge cap along with 30 degree profile to create a "V shape pop out. See illustration for example.

Show Details

CornerForms Finished End Cap - Angled

CornerForms Finished End Cap - Double
Description
Connects two panels back to back. Profile can be mechanically fastened to wall or display. Applications: Pop out perimeter wall, fitting/privacy rooms, partitions & more. See illustration for specific details. See illustration for specific details.

Show Details

CornerForms Finished End Cap - Double

CornerForms Edge Cap (Plastic)
Description
Integral part of the ConrnerForms system. Profile designed to be stapled onto 3/4" edge of panel and Corner Forms profiles are "snap onto edge profile. Use 5/8" tapered edge staple. See illustration for example.

Show Details

CornerForms Edge Cap (Plastic)
 
     
 
COPYRIGHT © ACCLAIM DESIGN & PROFILES, INC. 2011. All Rights Reserved.
Website Designed by Vaughan Web Design Inc.
Facebook Twitter