Acclaim Design & Profiles Inc.
 
 
 
   
  CubeConnects  
 

Fastening profiles to assemble 3/4" panels into cubes of various shapes.

CubeConnects are designed to assemble 3/4" thick panels into various shapes, such as squares, rectangles, equal sided triangles, right angle triangles, octagons and combinations of these. See diagrams. Standard 72" lengths; angles are based on inside degrees of measure. The panel assembly is accomplished by running a 1/8" saw cut or kerf on the panel's vertical edge. This kerf is cut about 7/8"on center from the vertical edge and usually on the rear of the panel.

IT IS STRONGLY RECOMMENDED THAT THE KERFING AND CUTTING PROCESSES ARE DONE ONLY AFTER the CubeConnects for the project have been received and have been precisely measured to assure an accurate fit.

CubeConnect 90 degrees (Radius)
Description
Connects two 3/4" thick panels at a 90 degree right angle.Application: Use profile to construct counter top, floor displays and other displays. Use 90-degree profile (3261) along with 45 degree (3281) to construct 90-degree triangle. See illustration for example.

Show Details

CubeConnect 90 degrees Radius

CubeConnect 90 degrees (Sharp)
Description
Connects two 3/4" thick panels at a 90 degree right angle. Non- radiusApplication: Use profile to construct cubes, rectangles and 90 degree sided triangle. Note 90 degree (3575) is a perfect tool to construct "counter kick bases". See illustration for example.

Show Details

CubeConnect 90 degrees Sharp

CubeConnect 45 degrees
Description
Connects two 3/4" thick panels at a 45 degree inside angle. Application: Use profile to construct counter top, floor displays and other displays. Profile can be used with 90 degree (3261) to construct 90/45 three sided triangle.See illustration for example.

Show Details

CubeConnect 45 degrees

CubeConnect 60 degrees
Description
Connects two 3/4" thick panels at a 60 degree inside angle. Application: Use profile to construct counter top, floor displays and other displays. Use 60-degree profiles (3282) construct equilateral triangle.

Show Details

CubeConnect 60 degrees

CubeConnect 135 degrees
Description
Connects two 3/4" thick panels at a 135 degree inside angle. Application: Use profile to construct counter top, floor displays and other displays. Use 135-degree profile to construct octagons and along with companion profile 90 degree (3261) to create perimeter ‘pop out" displays.

Show Details

CubeConnect 135 degrees
 
     
 
COPYRIGHT © ACCLAIM DESIGN & PROFILES, INC. 2011. All Rights Reserved.
Website Designed by Vaughan Web Design Inc.
Facebook Twitter